How to Clean and Sanitize a Fridge Water Dispenser

A water dispenser comes with a refrigerator and is a great way to have a cool, refreshing glass of water available whenever you need it. Additionally, in case of space constraints, you don’t need a full-proof dispenser. Therefore, buy the best fridge water dispensers for clean and hygienic water.

Owning a fridge water dispenser may seem difficult to keep clean and sanitized for everyday use, but its longevity depends on regular cleaning and sanitizing. This article shows how to clean and sanitize a fridge water dispenser to maintain its durability.

What are the reasons for cleaning your Fridge water dispenser?

A water dispenser is both a convenience and a health risk. However, Keeping it clean properly from time to time will prevent health risks. However, Water dispensers that are dirty can cause contamination of your drinking water supply by attracting germs. 

Eventually, minerals from your water reservoir can accumulate on cooler surfaces, which causes a bad taste. Keep your water dispenser in good shape to avoid the spread of microbial contamination in your drinking water supply.  

Tips for cleaning and sanitizing water dispenser

When water dispensers are not cleaned periodically, mould can form inside them due to the lack of proper maintenance. It is, therefore, very important that you keep your water cooler clean and disinfected at all times. Nevertheless, it is important to keep these tips in mind before cleaning water dispensers. The following tips are:

• Keeping your fridge water dispenser clean about once every three to six months will ensure that the water’s quality will preserve.
• If you intend to upgrade your filter soon, consider cleaning your water dispenser first.
• For maximum durability, you should follow the instructions in the user guide when cleaning your water dispenser.
• There are instructions in the user manual on emptying the water cooler before cleaning it, so follow them carefully.
• Before emptying the water reservoir, it is advisable to cool down the hot water storage tank.
• When cleaning the water dispenser, it is recommended that you wear disposable gloves, and a waterproof apron, to ensure your safety.

An Innovative Cleaning Solution

As far as cleaning the water dispenser is concerned, there are a few items that we can easily locate in our homes that we can use to keep them clean and sanitized. Hence, I will share a recipe to make it easier for you. We will need the following:

• Water
• Dish soap or vinegar 

It depends on what you have; use dish soap or vinegar. Ensure you use a small amount since refrigerator water dispensers are tiny and do not require additional soap. As an alternative, vinegar is the best option as it doesn’t need extra care, is great for disinfecting bacteria and germs, and makes the water surface hygienic.

Thus to make the cleaning solution:

• For dish soap: When cleaning water dispensers, add two drops of dish soap to a small water container.
• For vinegar: Mix one part vinegar with one part water to sanitize the fridge water dispenser.

Despite that, you will need a microfibre cloth, a straw brush to clean and extra water to wash the surface after you have sanitized it with the cleaning solution (mild-warm water will prefer).

Cleaning Procedure

Periodic maintenance is required with even the best refrigerator water dispenser for clean and hygienic water to ensure it works effectively and efficiently. We take a look at its cleaning procedure.

The Procedure Of cleaning The Nozzle And Tray

• First, dip the straw brush into the cleaning solution and place it into the dispensing hole one by one, both in hot and cold reservoirs.
• Make sure it is free of any deposits by carefully brushing it up and down.
• Upon completing a few more attempts, push the dispenser button so the sanitation mixture will come out of the nozzle. 
• The next step is to clean the tray and its close parts. 
• To do this, we need to remove the tray so that we can clean it. After removing it, soak it in a cleaning solution for 15 minutes to kill moulds and other bacteria, and then rinse them with clean water.
• But if the tray is not detached, use the microfibre cloth to wipe it thoroughly with the cleaning solution.
• To ensure the refrigerator is sparkling clean, wipe it with a microfiber cloth after it has been cleaned of dirt and water splashed onto it.
• Ensure all cleaning solution residue has been removed from the dispenser by rinsing it with clean water.
• Finally, reinstall everything removed, plug the dispenser in and let it work. 

The Procedure For Cleaning the Water Line

• First, you should unplug the fridge from the power outlet by removing the plug from the socket.
• Look at the back of the bridge where the water interval valve is present. Turn the valve clockwise, so water doesn’t leak out.
• Remove the white tube from the valve, but leave it connected to the water dispenser.
• To clean the water line, pour the cleaning solution into it. Afterwards, give the line a thorough rinse using more clean water after waiting for 10 to 15 minutes.
• Reconnect the water line to the main valve to restore water flow.
• Put your refrigerator back in place and power it in again.
• Ensure that you run the dispenser for five minutes if any cleaning solution is present, as it will remove instantly as long as the dispenser is running.

Conclusion

When the water dispenser in your refrigerator smells like mildew, you have to clean it to get rid of the odour and should also make sure it’s sanitary so your family doesn’t get sick. So that is why read the above article on how to clean and sanitize fridge water dispensers to keep your water fresh and hygienic.